Today i finished rebuilding the SHL M11 W from 1968.
New piston from the seventies, bored cylinder, reconditioned crank, all new bearings, and clutch.
Now i have to carefully run it in before the spring.
SHL M11 W- engine rebuilt.
Today i finished rebuilding the SHL M11 W from 1968.
New piston from the seventies, bored cylinder, reconditioned crank, all new bearings, and clutch.
Now i have to carefully run it in before the spring.
VW Kafer 1950- crotch cooler
Is the small things that make the difference.
We all know that devil is the details.
Looking at the body of the car i was thinking what to do to make the model stand out from the crowd, and decided to improve the crotch cooler detail. Straight from the box it didn't look much inspiring.
...so i cut the flaps out:
...the drivers side was scratch built, and set in closed position:
...and passengers side, with added mesh was set in slightly open position.
Painting exhausts- tutorial
We had the discussion on PWM forum regarding painting of exhausts on the WWII era plane. I was asked about the way i would paint the exhausts. It had to be slightly rusty, dusty, well worn, and dirty.
This is my way of approaching such subject.
The plane in mention was a Spitfire, but i don't do Spitfires, and the only exhaust i could find in my stash, was the one from Bf 109 E 4.
First stage- primer. I used the Humbroll 33 Matt Black.
I got it turbo dry by spraying the Nitro mist over it, end used the hairdryer to further enhance the curing time.
Base coat of Red Brown from Tamiya.
Microscale Matt Varnish, followed by some ligh rust pigments applied with wet brush.
Then the delicate mist of hairspray, and light coat of Gun Metal.
At this stage i dumped the part under the tap for few seconds, and started rubbing it with soft brush. Some Gun Metal wore off.
Another coat of Microscale Matt Varnish, followed by hairspray, and mist of Tamiya's Buff.
Again used the wet brush under the tap to gat some paint off.
Last stage of painting the exhausts- pigments. I used the Soot for inside of the exhaust tubes, light rust imitating fresh rust, and dark rust for the old rust. Smoke here, and there and oil stains to finish the job off
Hope you enjoy.
VW Kafer - the body
Work on the body of the Kafer started by removing the strengthening bars from the doors, and the luggage compartment:
Holes were drilled in the roof, where the sunroof must go:
The opening in the roof done:
Inside of the luggage compartment in place. I will not fix it until the work on the body is complete:
The complete range of paints arrived few days ago. I'm drawing the plans in my head how the bug will be painted:
T.B.C....
VW Kafer 1950- Headliner
Headliner was next.
Apart from usual things like ejection points i had to deal with few more issues here.
First i corrected the shape of the headliner, cutting away the front bit where the rear view mirror meant to be fixed. In the real car it is not fixed to the headliner, but just in front of it to the body of the car.
I added the ribbing this imitating the frame of the headliner.
Dome light was scratch built using resin, brass tube, and clear plastic for lens.
I had to adjust the dome light fixing point, as i got it wrong first time.
Assist straps were also scratch built, along with the fixing plates, and coat hooks.
All the window seals were scribed using home made tool.
VW Kafer 1950- interior painting
I started the interior with the seats. Even though the 1950 models came without the leather seats i decided to paint them as leather, because the car is being build as the vehicle used in recent years.
The seats straight from the box are featureless, so first thing was adding the detail like wear, and tear.
Exacto knife to the resque, and couple of hours later we have old leather seats.
Painted using acrylics, and oils. Dark wash overall, and brown for the set frame depicting the rust spots.
Since the rear of the cabin didn't have any focus point i added scratch built suitcase, sculpted the teddy bear, and also couple of ivory ashtrays. The ashtrays were turned from resin.
The seats straight from the box are featureless, so first thing was adding the detail like wear, and tear.
Exacto knife to the resque, and couple of hours later we have old leather seats.
Painted using acrylics, and oils. Dark wash overall, and brown for the set frame depicting the rust spots.
Some HB pencil on the edges of the frame was used to finish the job here.
All the knobs, and levers were scratch built. I used the resin for the ivory parts, as it had desired natural color. Rubber mats, and carpets were made with sandpaper. For rubber mats i turned the sandpaper (the fabric backed variety) upside down. The fabric pattern imitates the rubber well in my opinion.
Painted with Tamiya acrylics, and weathered using Mig, and AK pigments.
Since the rear of the cabin didn't have any focus point i added scratch built suitcase, sculpted the teddy bear, and also couple of ivory ashtrays. The ashtrays were turned from resin.
VW Kafer 1950 Revell 1/16 floor pan painting, and weathering
Floor pan painted, and weathered. I added the air valves to the wheels, and brake lines.
