Renault 3.4 t AHN complete

SdKfz 7/1 painting the running gear

Base of Hull Red:

My own mix of Panzer Grey:

Engine, gearbox, and tranny painted flat black:

Highlights:

Engine manifold painted mix of matte varnish, and pigments. Engine drybrushed Chrome, and gearbox drybrushed Flat ALuminum:

Gloss Varnish followed by wash. Some dirty streaking done. Engin treated to Engine Grime:

Bottom part sprayed transparent Buff:

Now onto wheels:

Surface texture added:

Primer on:

Rubber Black:

My own mix of yellow. Front wheels painted freehand- because i wanted bit of overspray on. Rear wheels painted with masks.

Another custom mix of green, and brown.

Light filters on rubber elements.

Highlights:

Mud on:

Two types of grass from Woodland Scenics, some leaves, damp earth enamel, wet effects, Plaster of Paris, and grinded dry grass was mixed to create wet, thick paste. I used it to smear in the hard to reach places, where the mud dried longer.

Few oil stains around the wheel seals completed the job.

Opel Blitz- superdetailing

Started adding the lovely details. I just enjoy this part of every build.
Added two pull handles on the side of each door, both door handles, and the bonnet locks.
I have assembled the cab for good now, with all the windows in place.

Added the headlights, searchlight, and the contour indicators

Mirror added.

Indicators, and reg plate

Tail lights on

Gaz 69 Milicja WIP

Finished building the Gaz. Now the weathering with oils, and pigments.

BMW R75 1/9 ESCI finished.

BMW R75 Final detailing

I finished the front end.

Lot of fiddly work, that require bike handling.

Decals were yellow from age, and i had to match the registration colour with the decal to disguise it.

I opened the headlight dimmer cover, and fitted the reflector inside along with the bulb.

Rear of the bike.
Mud guard support was unusable, and i had to scratch built the new one. I soldered it from wires, and brass sheet.
Registration plate is made of aluminum sheet. Decal was yellow, so i made it look dusty to cover it.
I added some damage, and scratches to the pannier.

Handlebar.
I reworked the way the bar is mounted.
Added few bolts, and nuts.
The throttle mechanism built from scratch, as was the horn button, and light switch.
All the pins which meant to be the cables mounting points were sanded, and instead i drilled the bar to insert the cables inside it later on.

Mentor 1/35 finished

Job done on the Mentor little dio.

I applied custom decals made for me by my friend Daniel Conkala.

Hope you enjoy.